The occurrence of problems in the production of connecting wire processing cannot be completely controlled, and it can only be controlled at each stage of the production process to avoid mass production of connecting wire processing product quality problems. When encountering common problems that are easy to occur in connecting wire processing, it is necessary to analyze the causes and find solutions. We will answer the questions of scratches, bumps, and scratches in the processing of the connecting wire:

1) Cause: There are grooves on the drum

Solution: Remove the drum to correct and polish it

2) Cause: Uneven ground

Solution: The manufacturer of the connecting wire claims to renovate the ground and lay steel plates

3) Cause: Excessive take-up

Solution: Stick to your position, concentrate, and follow the rules to move forward

4) Cause: Local area with damaged wires on the equipment

Solution: The interface of the drum is uneven, and the guide wheel rotation is not sensitive

5) Cause: Jumping wire phenomenon on the conical drum

Solution: Smooth the surface of the drum and ensure that the angle is maintained correctly

6) Cause: Wire and coil collide with each other

Solution: The wire reel should be placed in a "T" shape and separated from each other during transportation