Li-Po batteries are used everywhere. We utilize them to power everything from radio control transmitters to gasoline pumps to engine starters to our cars and airplanes. Based on the size and planned use of the connector, the search for the right Li-Po connector may start. It should go without saying, but you need a smaller connection if your battery is smaller. You will need a bigger connection if your battery is huge. All connections vary since they are used for a variety of purposes and have a wide range of currents. Power connections and balance connectors are the two different categories of connectors. The voltage of each cell is balanced using a balanced connection, which is used with these power connectors for high current applications everywhere. The type of connector you choose to use is solely a matter of personal taste. Just by being aware of this, you may start to focus your search on the best connector for your application. This article will provide you with a guide about the features and applications of the EC5 to XT60 charger adapter.
Chargers or rechargers may be used to describe adapters for battery-operated devices (see also battery chargers).
Focus on voltage during charging as series connections have no impact on the battery bank's Amp-hour capacity. The charger must fulfill the charging demands of the batteries connected in series. For instance, a 12-volt battery charger is required to fully charge two six-volt batteries that were linked in series to form a 12-volt battery bank.
XT60 charger adapter:
XT60 is made up of yellow nylon plastic. This type of RC battery connector is preferred by the majority of individuals because many devices require a 60 Amp load capacity. Because they are made of nylon, they are resistant to melting and have issues with pin loosening.
One distinctive aspect of them is the presence of solder cups, which fit a wire in extremely tightly and provide a very appropriate and ideal connection. They have a longer carrying capacity for the high amount of current than Dean's T-plug connectors. Because of this, it is regarded as a modified version of connectors that are currently on the market.
Because they are simpler to plug and unplug than deans or EC3 connections, they are preferable.
Even though certain external soldering pins need heat shrink encapsulation, this connection type may be changed out and reused.
EC5 charger adapter:
This type of RC battery connector has 5mm bullet pins and is bigger than the EC3 connector. Because there is more surface area for every interaction, they are superior. They have a load capacity of up to 120 amps and a burst capacity of about 150 amps. They are ideal for use with large-scale electric aircraft and electric heels in the size 700–800.
It is the same as EC3 because all of the soldered wires on the back of the pins are pressed into the connection housing, eliminating the need for heat-shrink insulation.
Key features of EC5 to XT60 charger adapter:
Amount of current they carry:
EC5 connection can carry a large amp current by using a 10-AWG wire, capable of carrying more than 120A of continuous current. XT60 can carry current up to 60 amp continuous current. Xt60 for 10 seconds can carry up to 100 amps of current.
This particular piece of charger adapter has a distinctive shape, is aesthetically pleasing to use, and is simple to hold.
Safety against short circuits:
EC5 to XT60 charger adapter is protected against shorting and reversing polarity.
Both connecting and disconnecting from these connections are simple.
It's really simple to solder this adapter. It requires little to medium effort to solder.
Have a variety of applications:
This adapter is said to be suited for the sophisticated applications used nowadays due to the higher technology employed in it.
Convenience, reliability, and durability were all taken into consideration when designing this adapter.
Due to its low cost and general performance, XT-60 connectors are growing in popularity.
- It guarantees a high-amp connection.
- It creates an incredibly strong bond.
- This connection resists melting and bending.
Applications of EC5 to XT60 charger adapter:
The XT60 performs best in situations that require 65A or more. This aids in creating the ideal link between the robotic electronics in your RC helicopter and airplane and a battery.
Every workstation should include EC5 connections because of their superior quality. Connectors, leads, and accessories for EC5 operate with any battery, charger, ESC, Power Meter, etc., and are ideal for electric power applications. For high-power applications, they are perfect.
Is XT60 to EC5 compatible?
You can quickly convert an EC5 battery to an XT60 connection by putting in this little adapter cable; messy soldering is not necessary. For XT60-equipped products like the ISDT chargers or dischargers, it is the ideal add-on.
Once you've identified the proper charger, attach its positive output to the first battery's positive terminal. After that, join the charger's negative output to the negative terminal of the final battery in the series. The series will require the same amount of time to charge as a single battery would.
You may save money by using a battery adapter to use one brand of battery with another brand of the power tool. Batteries and chargers don't need to be replaced.
In the end just want to mention here that, there are many excellent connections available, each with advantages and disadvantages. Find the solution that best suits your needs and your application, and then stay with it. EC5 to XT60 charger adapter connectors are essential for good performance and affordable options. Visit Kelemax website once to choose the finest charger adapter that fits your needs.
Read more: Features of FUTABA servo wire